(*contributed equally to this work) Published: Vol 13, Iss 17, Sep 5, 2023 DOI: 10.21769/BioProtoc.4643 Views: 387
Reviewed by: Wenrong HeAnuradha SinghAnonymous reviewer(s)
Protocol Collections
Comprehensive collections of detailed, peer-reviewed protocols focusing on specific topics
Related protocols
Colocalization Assay with Fluorescent-tagged ATG8 Using a Nicotiana benthamiana-based Transient System
Jinyan Mai [...] Na Luo
Aug 20, 2022 1635 Views
Synthetic Promoter Screening Using Poplar Mesophyll Protoplast Transformation
Yongil Yang [...] C. Neal Stewart Jr.
Apr 20, 2023 573 Views
An In-depth Guide to the Ultrastructural Expansion Microscopy (U-ExM) of Chlamydomonas reinhardtii
Nikolai Klena [...] Virginie Hamel
Sep 5, 2023 1042 Views
Abstract
Studies on chromosomal status are a fundamental aspect of plant cytogenetics and breeding because changes in number, size, and shape of chromosomes determine plant physiology/performance. Despite its significance, the classical cytogenetic study is now frequently avoided because of its tedious job. In general, root meristems are used to study the mitotic chromosome number, even though the use of root tips was restricted because of sample availability, processing, and lack of standard protocols. Moreover, to date, a protocol using shoot tips to estimate chromosome number has not yet been achieved for tree species’ germplasm with a large number of accessions, like mulberry (Morus spp.). Here, we provide a step-by-step, economically feasible protocol for the pretreatment, fixation, enzymatic treatment, staining, and squashing of meristematic shoot tips. The protocol is validated with worldwide collections of 200 core set accessions with a higher level of ploidy variation, namely diploid (2n = 2x = 28), triploid (2n = 3x = 42), tetraploid (2n = 4x = 56), hexaploid (2n = 6x = 84), and decosaploid (2n = 22x = 308) belonging to nine species of Morus spp. Furthermore, accession from each ploidy group was subjected to flow cytometry (FCM) analysis for confirmation. The present protocol will help to optimize metaphase plate preparation and estimation of chromosome number using meristematic shoot tips of tree species regardless of their sex, location, and/or resources.
Keywords: Chromosome numberBackground
The plant genome is organized into chromosomes, preserving hereditary information and facilitating its replication, transcription, and transfer. One of the fundamental aspects of plant evolutionary biology is to understand the genome organization and its functional aspects that directly or indirectly act in concert with plant adaptability. Chromosomal studies imply a historical impression of natural consequences, for example, the patterns of chromosomal evolution influenced by factors like natural/artificial selection pressure or crop domestication (Tang et al., 2010). The evolution of chromosome size, structure, and number and the change in DNA composition suggest high plasticity of nuclear genomes at the chromosomal level (Guerra, 2008). In the recent past, integrated cytogenetics, chromosome-level sequencing, and comparative analysis were implemented to grasp the essential component of the evolutionary mechanisms of plant genomes. There are approximately 450,000 species of green plants, but only approximately 300 genome assemblies at the chromosome-scale, corresponding to 812 species (Arita et al., 2021; Kress et al., 2022). Additionally, polyploidy (or whole-genome duplication, WGD) is considered an evolutionary and ecological force in times of stress adaptation (Van de Peer et al., 2021). Hence, chromosomal information has significant importance in plant breeding, genetic, and biotechnological studies including chromosome-scale genome assembly, which can complement molecular phylogeny towards the understanding of complex evolutionary consequences.
Despite its significance, the estimation of chromosome numbers using the squash technique has been restricted (Goldblatt, 2007). For the majority of monocots, root tips are widely used to study the mitotic chromosome number, as the use of shoot tips is laborious, and squashing reduces the spread quality (Anamthawat-Jónsson, 2003). However, mitotic metaphase plate preparation using root tips or floral tissues present considerable disadvantages, specifically for tree plants: (a) living material with actively growing tissues, like meristems, are prerequisite (Guerra, 2008), and the collation of meristematic root tips from the mature tree plant is not easy (Sinha et al., 2016), (b) seed-derived root tips do not represent the same chromosome complements as their mother trees, because of introgressive hybridization (Anamthawat-Jónsson, 2003), (c) grafted plants do not comprise a true root system; hence, chromosomal study is difficult, and (d) the availability of floral tissues depends on the favorable season (Anamthawat-Jónsson, 2003). On the other hand, metaphase plate preparation using shoot meristematic tips present major advantages compared to root tips or floral tissues: (a) ease of collecting intact healthy explants from plants; (b) shoot tips tend to have less condensed chromosomes, and longer or extended chromosomes are desirable as the mapping resolution will be better (Anamthawat-Jónsson, 2003); further, for a highly heterozygous crop like mulberry, the chromosome size and number show huge variations (Datta et al., 1954), and shoot tips could be precious explants to estimate the chromosome number of higher ploidy plants; and (c) for recalcitrant seeds as well as endangered tree species, shoot tips of original mother plants may serve the purpose.
So far, published articles/protocols using shoot tips are very limited; cytogenetics cannot be applied in population studies unless samples are obtained from actual plants in the field, because chromosome number varies among the progeny (Anamthawat-Jónsson, 2003). Recently, Chang et al. (2018) suggested that the small size of chromosomes of mulberry also limits distinguishing euploid/aneuploid, and karyotypic analysis could help identifying different ploidy. It is, therefore, necessary to develop a standard, economically feasible base protocol for the screening and characterization of large-scale germplasm accessions. In addition, high-cost flow cytometry (FCM) analysis for large-scale accessions of germplasm may not be affordable for all researchers (Windham et al., 2020). This barrier is exacerbated by a lack of sufficient details on critical aspects of the protocol like tissue choice, maceration, and squashing (Windham et al., 2020).
Mulberry (Morus spp.) has been commercially exploited as the host of the monophagous pest silkworm (Bombyx mori L.). It belongs to the Moraceae family, which comprises 37 genera, with more than 1,100 species (Clement and Weiblen, 2009). The genus Morus has over 10 species with more than 1,000 cultivated varieties spanning Asia, Europe, Africa, and the United States (He et al., 2013). Efforts were made to classify Morus species; however, to date, taxonomic nomenclature remains doubtful. Besides, genetics of inheritance are also complicated in Morus species due to the higher level of heterozygosity as well as WGD (Jain et al., 2022). Mulberry has a wide range of polyploidy; for example, M. notabilis was reported as a haploid, having a chromosome complement of 2n = x = 14 (He et al., 2013), while M. alba, M. atropurpurea, M. bombycis, M. indica, M. latifolia, and M. rotundiloba were considered diploids, having 2n = 2x = 28 (Datta, 1954). The majority of triploids (2n = 3x = 42) and tetraploids (2n = 4x = 56) have been identified in M. laevigata (Das, 1961). Hexaploid species (2n = 6x = 84), such as thick leaf M. serrata (Basavaiah et al., 1989) and M. tiliaefolia (Seki, 1952), are also recognized; the ploidy can extend up to decosaploid (2n = 22x = 308), as in M. nigra (Basavaiah et al., 1990).
The generation of chromosomal/ploidy-related information of non-model tree plants like mulberry, where the occurrence of polyploidization is common, can be a logistic strategy to create a foundation for future molecular cytogenetics and next-generation sequencing–based work, toward potential crop development and conservation. In this context, the metaphase chromosome number of 200 germplasm accessions of different accessible Morus spp. was counted using shoot meristematic tissue. Accessions were obtained from the Central Sericultural Germplasm Resources Centre (CSGRC), Hosur, India. Hopefully, the present protocol will help to optimize metaphase plate preparation and chromosome number estimation using meristematic shoot tips of tree species regardless of sex, location, and/or resources.
Materials and reagents
Consumables
Eppendorf tubes, 1.5 mL (Tarsons, India)
Reagent bottles, amber 25 mL (Borosil, catalog number: 1519009)
Glass slides, 76 mm × 26 mm (Borosil, Product code 9100P02)
Coverslip, rectangular, 24 mm × 60 mm (Blue Star, India)
Aluminum foil, 72 m (Century, India)
Dissecting needle (Labkafe, India Product code: LKBI 008/1)
Plant Material
Tree plants approximately 15 years old, maintained at CSGRC’s field gene bank, of different cytotypes as diploids (MI-0014 and MI-0308), triploids (MI-0173 and MI-0799), tetraploids (K2-4X), hexaploids (ME-0126, MI-0426, and MI-0571), and decosaploid (ME-0241) were selected for this study. In the present protocol, for metaphase chromosome count, apical shoot meristematic tips were collected after 20 days of pruning.
Reagents
Sterile, double-distilled water (ddH2O)
100% glacial acetic acid (Rankem, catalog number: A0031)
0.5 M ethylenediaminetetraacetic acid (EDTA) (GeNei, catalog number: FC43)
Ethanol (HiMedia, catalog number: MB106)
Potassium chloride (KCl) (HiMedia, catalog number: PCT0012)
2.5 (w/v) pectinase (HiMedia, catalog number: PCT1519)
2.5 (w/v) pectolyase (HiMedia, catalog number: PCT1520)
1:1 (v/v) cellulase (HiMedia, catalog number: RM3331)
1% acetocarmine (HiMedia, catalog number: PCT1304)
1% Orcein (HiMedia, catalog number: RM277)
Saturated para-dichlorobenzene (PDB) (HiMedia, catalog number: GRM6907) (see Recipes)
0.002 M 8-hydroxyquinoline (HQ) (HiMedia, catalog number: GRM7135) (see Recipes)
45% GAA (glacial acetic acid) (see Recipes)
70% ethanol (see Recipes)
3EtOH:1GAA (see Recipes)
75 mM KCl (see Recipes)
Enzyme cocktail (see Recipes)
1% aceto-orcein (see Recipes)
Equipment
Surgical blade, size 22 (Surgeon, India, REF 10122)
Personal protection equipment (Oriley, model: ORPPE6), including gloves (model: KSN30) and safety glasses (Augen, model: safety glass-SG-03)
Ice flaker (PAREX, PSW-130)
Squeeze bottle (Borosil, model: 0166024)
Highly absorbent blotting paper (Swastik, India)
Forceps, pointed, 5" (Borosil, model: LAFP8888005)
Minicooler (Tarson, model: 525060)
Incubator (ESCO, model: CCL-050B-8)
Micropipette (Eppendorf)
Freezer (Whirlpool, model: ICEMAGIC FF-350)
Stereo zoom microscope (Leica, model: Wild M8-308700)
Portable digital microscope (Medprime, model: BT-E2020) with iPad (AppleInc.)
iMac 27’’ M1 chip-macOS Monterey (Apple Inc.)
Sankalp immersion oil (Oil LV, model: 1017)
Spirit lamp (HiMedia, model: LA275)
Sealing wax (Alpha Chemika, model: AL2934)
Software
Cilika (Version 1.30), Medprime Technology Pvt. Ltd. (www.medprimetech.com), image capture software
Microsoft Excel, Microsoft
Keynote presentation software (Apple Inc. Version 10)
Floreada.io (https://floreada.io/flow-cytometry-software)
Procedure
Collections of samples and pre-treatment
Select 3–5 young healthy shoots and use needle and forceps to dissect fresh apical shoot meristematic tips, approximately from 0.5 to 1.0 cm, between 9:00 and 10:00 am. Immediately transfer the collected samples to the pre-fixative solution, i.e., 1 mL of PDB with 20 µL of HQ in a 1.5 mL Eppendorf tube (Figure 1).
Note: For pretreatment of shoot apical meristematic tips, a minimum of three (for large size tetraploid accession) and a maximum of five (small size apical tips specifically for diploid accession) samples per Eppendorf tube can be used. The sample should be transferred immediately to the pre-fixative solution, to enhance the metaphase arrest stage. PDB and HQ stock solutions should be kept separately in amber reagent bottles at room temperature (RT) and mixed properly by gently inverting five times before collection of the sample.
Figure 1. Detailed steps and daily activity for mitotic metaphase plate preparation using shoot meristematic tissues of Morus spp.
Transfer the pretreated samples to a mini cooler at 0 °C for 5 min, followed by 4 °C for 4 h.
Note: Place the mini cooler in the ice bucket before conducting sample collection for the maintenance of the mini cooler’s temperature.
Discard the pre-fixative (PDB+HQ) solution and remove young leaf primordia using pointed forceps and a needle under a stereo zoom microscope. Transfer the trimmed apical shoot tips to a strainer and wash thoroughly under running tap water for 5 min, followed by 5 mL of ddH2O for 10 min in a watch glass (Figure 2).
Note: Removal of the young leaf primordia (usually 3–4 numbers) is useful to enhance enzymatic treatment (Step C9). Thorough washing is necessary to remove PDB+HQ residues.
Figure 2. Step-by-step flowchart of sample collection, pretreatment, fixation, staining, and squash for microscopic observation
Fixation of meristems
Transfer the washed samples to 1 mL of ice-cold 3EtOH:1GAA in a 1.5 mL Eppendorf tube and incubate for 1 h at RT (24 ± 2 °C).
Note: Prepare 3EtOH:1GAA fresh before fixation.
Discard the 3EtOH:1GAA solution and replace with freshly prepared ice-cold 3EtOH:1GAA solution. Incubate the samples at 4 °C for a minimum of two days. Replace with fresh 3EtOH:1GAA solution every 12 h.
Discard the 3EtOH:1GAA solution and wash thoroughly in 5 mL of ddH2O for 10 min; then, store the samples in 1 mL of 70% ethanol in a 1.5 mL Eppendorf tube at 4 °C for further use.
Wash the samples in 5 mL of ddH2O twice in a watch glass for 10 min each. Transfer the samples to 1 mL of 45% GAA in a 1.5 mL Eppendorf tube and incubate for 1 h at RT.
Wash thoroughly in 5 mL of ddH2O for 10 min in a watch glass and remove water from the sample with a blotting paper.
Enzymatic digestion
Treat the samples with an enzyme cocktail comprised of cellulase (2%), pectinase (2.5%), and pectolyase (1%) for 4 h at 37 °C in the dark using an incubator.
Staining
Transfer enzyme-treated samples to 500 μL of 1% aceto-orcein in a 1.5 mL Eppendorf tube covered with aluminum foil (to maintain dark conditions) and incubate the sample-containing tubes for 12–14 h at RT.
Squashing (see Video 1)
Transfer one of the processed (stained) samples from the aceto-orcein stain to a glass slide.
Note: Remove the excess stain with the help of blotting paper if required.
Add two drops of 45% GAA to the sample and gently dissolve the tissue with the back side of the needle.
Gently mix the sample with the addition of one drop of acetocarmine and three drops of aceto-orcein stain; subsequently, remove the debris with a dissecting needle.
Place a coverslip over the slide. Keep the slide inside a folded blotting paper and gently press with your thumb to remove the excess stain and to spread uniformly.
Gently tap over the coverslip using the backside of the needle to obtain an optimum spread of cells as well as chromosomes.
Note: To enhance the spreading quality, continuous tapping is required until the clump of cells spread over the slide as a thin layer of cells. Ensure that no air bubbles remain.
Apply flame heat (using spirit lamp) on the bottom side of the mounted slide for 2–3 s and gently tap for precise chromosome spreading.
Seal the mounted slide with wax (optional).
Place the slide and visualize the chromosome under the microscope (Portable digital microscope, Medprime, model: BT-E2020). Any compound microscope with 40× or 100× objectives with oil immersion can be used. Microscopic images of representative accessions from each ploidy group are represented in Figure 3.
Figure 3. Metaphase plates and estimated chromosome number of different cytotypes of Morus spp. (A) diploid V1 (2n = 2x = 28), (B) triploid AR12 (2n = 3x = 42), (C) tetraploid M. laevigata L. (2n = 4x = 28), (D) hexaploid M. Serrata Roxb. (2n = 6x = 84), and (E) decosaploid M. nigra L. (2n = 22x = 308). Scale bar = 5 µm.
Flow cytometry (FCM) analysis
To confirm the ploidy level cytotypes, genome size was estimated by FCM of selected ploidy (2x, 3x, 4x, 6x, and 22x) accessions, which were identified through chromosome number count (Figure 4). A dual laser FACSCaliburTM (BD Biosciences, United States) was used to estimate genome size with some modifications to the protocol described by Galbraith et al. (1983). In brief, young mulberry leaves (5–6 days old) of approximately 0.5 cm2 were collected between 8:30 and 9:00 am. With a razor blade, the leaf sample was chopped in 2 mL of nuclear isolation buffer [hypotonic propidium iodide (50 μg/mL), trisodium citrate dihydride (3 g/L), 0.05% (v/v) Nonidet P-40, and RNase A (2 mg/mL)]; filtered (30 μm nylon mesh) nucleus suspensions were collected in tubes. The tubes were capped and kept at 37 °C for 30 min. Then, the samples were subjected to FCM analysis. Pisum sativum was used as the standard reference and measurements were made in triplicates.
Figure 4. Confirmation of different mulberry cytotypes using flow cytometry analysis. Histogram of propidium-iodine-A (PI-A) fluorescence intensity of (A) reference of Pisum sativum, (B–C) diploid, (D–E) triploid, and (F) tetraploid. (G) List of accessions studied, genome size [in mega base pairs (Mbp) and pictogram (pg)], and predicted ploidy level. (H) Histogram of PI fluorescence intensity (count vs. PI-A) of diploid (2x), triploid (3x), tetraploid (4x), hexaploid (6x), and decosaploid (22x) with reference to Pisum sativum. (I) Scatterplot (PI-W vs. PI-A) of diploid (2x), triploid (3x), tetraploid (4x), hexaploid (6x), and decosaploid (22x) nuclei, showing they are evenly spaced in respect to fluorescence and represent a well-defined series of areas that correspond to 2C, 3C, 4C, 6C, and 22C nuclei.
Data analysis
Metaphase plate images were captured (with an automated measuring scale bar) and a presentation (karyomorphological drawing) was prepared in Keynote, Apple Inc. (Version 10).
Genome size (Mbp) was calculated according to the formulae by Lysak and Dolezel (1998) with the conversion of 1 pg equal to 980 Mbp (Dolezel et al., 2003). Finally, the genome size of studied accessions was calculated using the standard reference of Pisum sativum. DNA content of the mulberry accessions ranged from 0.85 (diploid) to 8.67 pg (decosaploid) and the coefficient of variation was 3.21 (<5%; Figure 4H). The floreada.io (https://floreada.io/flow-cytometry-software) online tool was used to generate histograms and scatterplots for FCM analysis.
Notes
In step B5, change 3EtOH:1GAA solution once every 30 min for bleaching of chlorophyll.
In step B6, incubation for a minimum of two days and resuspending the sample in freshly prepared ice-cold 3EtOH:1GAA solution at 12-h-intervals is essential.
In step C9, enzymatic treatment (pectinase, cellulase, and pectolyase) for 4 h at 37 °C in the dark is recommended for karyotype analysis of higher ploidy level (2n = 3x, 4x, 6x, and 22x). For general cytological analysis and chromosome study, treating only with pectinase for 6 h at 37 °C is optimal.
Recipes
PDB
Reagent | Final concentration | Amount |
---|---|---|
PDB | Saturated | 10 g |
H2O | n/a | 95 mL |
Total | n/a | 100 mL |
70% ethanol
Reagent | Final concentration | Amount |
---|---|---|
Ethanol (absolute) | 70% | 70 mL |
H2O | n/a | 30 mL |
Total | n/a | 100 mL |
0.002 M HQ
Reagent | Final concentration | Amount |
---|---|---|
HQ | 0.002 M | 0.073 g |
ddH2O | n/a | 250 mL |
Total | n/a | 250 mL |
45% GAA
Reagent | Final concentration | Amount |
---|---|---|
GAA | 45% | 45 mL |
ddH2O | n/a | 55 mL |
Total | n/a | 100mL |
Potassium chloride (KCl)
Reagent | Final concentration | Amount |
---|---|---|
KCl | 1 M | 7.5 g |
ddH2O | n/a | 100 mL |
Total | n/a | 100 mL |
EtOH (3):GAA (1)
Reagent | Final concentration | Amount |
---|---|---|
Ethanol | 3 parts | 75 mL |
GAA | 1 part | 25 mL |
Total | n/a | 100 mL |
Enzyme cocktail
Reagent | Final concentration | Amount |
---|---|---|
KCl | 75 mM | 7.5 mL |
Cellulase | 2% | 2.0 g |
Pectinase | 2.5% | 2.5 g |
Pectolyase | 1% | 1.0 g |
EDTA (0.5 M) | 7.5 mM | 1.5 mL |
ddH2O | n/a | 91 mL |
Total | n/a | 100 mL |
1% Aceto-orcein
Reagent | Final concentration | Amount |
---|---|---|
GAA | 45% | 45 mL |
Orcein | 1% | 1.0 g |
ddH2O | n/a | 55 mL |
Total | n/a | 100 mL |
Acknowledgments
The work was supported by a grant (PIG 06004 SI) from Central Silk Board (CSB), Ministry of Textiles, GoI, Bengaluru, India. Ms. Sreya Antony thanks CSB for the Junior Research Fellowship. We are grateful to Dr. Chandish R. Ballal, Former Director, ICAR-National Bureau of Agricultural Insect Resources, Bengaluru, India for continuous encouragement and support. We thank Mr. Shreyas M. Burji, Auxochromofours Solutions Pvt. Ltd., and the team of the National Centre for Biological Sciences (NCBS), Bengaluru, India for the flow cytometry facility, and Mr. C. Ventakeshappa, CSGRC-Hosur for technical support. We would like to thank Subhankar Biswas, Department of Botany, ISc, Banaras Hindu University, Varanasi, India for constructive suggestions for video editing. We are also thankful to all three expert reviewers for their constructive suggestions/comments.
This protocol is based on the research paper (Gnanesh et al. 2023).
Competing interests
The authors declare that they have no competing interests.
References
Article Information
Publication history
Accepted: Dec 11, 2022
Published: Sep 5, 2023
Copyright
© 2023 The Author(s); This is an open access article under the CC BY-NC license (https://creativecommons.org/licenses/by-nc/4.0/).
How to cite
Mondal, R., Antony, S., Gnanesh, B. N., Thanavendan, G., Ravikumar, G., Sreenivasa, B. T., Gandhi Doss, S. and Vijayan, K. (2023). A Protocol for Mitotic Metaphase Chromosome Count Using Shoot Meristematic Tissues of Mulberry Tree Species. Bio-protocol 13(17): e4643. DOI: 10.21769/BioProtoc.4643.
Category
Plant Science > Plant cell biology > Cell imaging
Plant Science > Plant molecular biology > Chromatin
Do you have any questions about this protocol?
Post your question to gather feedback from the community. We will also invite the authors of this article to respond.
Tips for asking effective questions
+ Description
Write a detailed description. Include all information that will help others answer your question including experimental processes, conditions, and relevant images.
Share
Bluesky
X
Copy link